| Customization: | Available |
|---|---|
| Raw Material: | PVC |
| Screw: | Single-Screw |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PVC EVA granulation pelletizing production line,This machine can compounding PVC/EVA and other material,machine with wind-cooling die face for the PVC/EVA material.
You can compounding all the powder material together with a high speed mixer and then send to the machine to produce pellets, or you can send the rigid material directly into the feeder to produce the pellets.
These kind of material can not use water, if there is water in the die ,the die will be block up, so it must be use wind to cooling the die, and the extruder screw is special designed for such material.
Machine process way: High speed mixer----rotary charger----hopper/feeder----Extruder--wind cooling hot die face pelletizing system----wind transmiss system----Silo
Customer can choose to use high speed mixer, rotary charger or not, you also can send the material directly into the hopper/feeder by mannal. We can add one alarm in the hopper, when there is no material in the hopper, it will alarm, and then you can add the material again, so that you won't worry about if there is material in the hopper.
Machine detail parameter
| Item NO. | Item name | Quantity | Power |
| 1 | Hopper | 1set | -- |
| 2 | SJ65-27 Single screw extruder | 1set | 22kW |
| 3 | Hot cutter mould | 1set | -- |
| 4 | Wind-cooling rubs surface hot cutter | 1set | 1.1kW |
| 5 | Wind transmission system | 1 set | 2.2kW |
| 6 | Silo | 1set | -- |
| 7 | Electric control cabinet | 1set | -- |
| NO. | Item. | Spec. |
| 1 | Material | EVA/pvc |
| 2 | Capacity | output:50-80 kg/hr |
| 3 | Final products size | 2.5mm |
| 4 | Electricity power | 380V 50HZ 3P |
| 5 | Installed power | 50 KW for whole plant |
| 6 | Power consumption | 60% of installed power |
| 7 | Plant area | > 36 Square meter > 3 meter height Estimate line size: 6m(Length)* 2m(Width)* 3 m(Height) we can make the line turn as U or L shape to fit the buyer's plant |
| 8 | Manpower | 2-3 Persons required |
| 7 | Payment terms | 30% by TT as deposit; Balance paid by TT before shippment. |
| Delivery time | 35 Working days since receive the deposit | |
| Package | Packing by film. | |
| Warranty Period | 12months since the date of BL. | |
| Shipping | By sea | |
| Offer validity | 60Days |
Environmental protection
When you produce powder, there is too much power in the workhouse, it will be very dirty, then you can choose to use Auto vacuum loading system, so that there won't much powder in the factory.
More machine details photo
Hopper/feeder
1.You can use feeder to feed the material into the extruder
2.You also can use only one hopper, the material can go directly into the extruder
3.We can install one alarm on the hopper, when there is no material, it will alarm
4. Material: Stanless stell 304
Extruder
1.Gear box:high torque,low noise,external connect with cooling recycling system;
2. Screw: 38CrMoA1A,Nitrogen treatment;
3. Barrel: 38CrMoAlA,nitrogen treatment,barrel wind-cooling; temperature controller
4. Combined core parts with water cooling set, the water cooling box is under the extruder.
There are five heating zone.(in some hot country, wind is not enough to cooling the extruder, then we can use water to cooling the extruder)
5. Drive power:AC motor(22kW)
6. Screw diameter:65mm;
7. L/D:27 :1; or 25:1
8. Lubrication:forces lubricating;
Wind cooling hot cut die
1. Screen changer quickly
2. Hot cutter mould: Die 40Cr,
3. Hot-cutter mould material is 40Cr,surface hard plating thickness: 0.03~0.04
4. Diverter hard plating, thickness 0.03~0.04, cost aluminum
5. Stainless steel pelletizer coverδ2, with light and watch hole
6. Can be move up and down, back and forward can be moved a little, material of cutter is 9CrSi, cutter rest, cutter holder with chromate treatment, there is spring on the cutter holder to put the cutter stick on the die, the pelletizer wheelbarrow with track, can move, all pelletizing system install on the mould.
1. We supply below necessary documents with the machine:
2. We provides one-year quality guarantee. During this period, if the machine's malfunction is approved to be our responsibility, we will send the broken spare parts to you with DHL courier or other way within 7 workdays after receiving the complainant. And send the technicians to the buyer's factory for maintaining. All charges are in our account.
3. After one year guarantee, If you need we can provides payable spare parts and technician's VISITING maintenance, and any broken spares we can send you soon as possible.
4. We trust that our quotation meets with your requirements and we will gladly furnish you with further information.
5. 24Hours service : Cell+86-13915707468
){kind=link}